TaylorMade RocketBladez 2.0 Irons Specifications
Full factory loft, lie and length chart for the TaylorMade RocketBladez 2.0 irons, 2014–2015.
- Years produced
- 2014–2015
- Category
- Game Improvement Irons
- Construction
- investment cast with Speed Pocket sole slot
- Material
- stainless steel
- Set makeup
- 4–SW
Data confidence: low. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 4 | 20 | 61.5 | 38.5 | 0.236 |
| 5 | 23 | 62 | 38 | 0.224 |
| 6 | 26.5 | 62.5 | 37.5 | 0.189 |
| 7 | 30.5 | 63 | 37 | 0.165 |
| 8 | 35 | 63.5 | 36.5 | 0.134 |
| 9 | 40 | 64 | 36 | 0.106 |
| PW | 45 | 64.5 | 35.5 | 0.079 |
| AW | 50 | 64.5 | 35.5 | 0.055 |
| SW | 55 | 64.5 | 35.5 | 0.039 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade RocketBladez 2.0
The RocketBladez 2.0 was the 2014 follow-on to the RocketBladez, sold largely through big-box and off-channel retail rather than as a headline launch. It keeps the Speed Pocket sole slot in the long and mid irons, adds a revised Inverted Cone face for a wider effective hitting area, and uses progressive offset that shrinks through the set. Lofts are unchanged from the RocketBladez, at 30.5 degrees in the 7-iron and 45 degrees in the pitching wedge, and the set starts at the 4-iron rather than the 3. TaylorMade never published a spec sheet for it, so the numbers below carry lower confidence than the rest of the family — see sources. Specs are the men's standard steel-shaft build.
Stock shafts
- TaylorMade RocketFuel steel — steel · flexes: R, S
- TaylorMade RocketFuel graphite — graphite · flexes: A, R, S
Related models
- Predecessor: TaylorMade RocketBladez
- Earlier in the line: TaylorMade RocketBallz
- Compare: TaylorMade RocketBladez 2.0 vs TaylorMade RocketBladez
- Compare: TaylorMade RocketBladez 2.0 vs TaylorMade RocketBallz
Frequently asked questions
What is the loft of a TaylorMade RocketBladez 2.0 7-iron?
The TaylorMade RocketBladez 2.0 7-iron is 30.5 degrees, with a 63-degree lie and a 37-inch steel-shaft length. That is the same loft as the original RocketBladez 7-iron.
What is the difference between the RocketBladez and the RocketBladez 2.0?
The lofts are the same. The 2.0 is a 2014 follow-on sold mainly through off-channel retail, starting at the 4-iron rather than the 3-iron, with a revised Inverted Cone face and progressive offset. Both use the Speed Pocket slot in the sole of the longer irons.
Which RocketBladez 2.0 irons have the Speed Pocket?
The Speed Pocket runs through the long and mid irons, the 4 through 7. The short irons and wedges do not have it, because the benefit of extra low-face ball speed matters far less at those lofts.
What clubs came in a RocketBladez 2.0 set?
The stock retail set was 4-PW. TaylorMade also catalogued a 50-degree approach wedge and a 55-degree sand wedge to extend it, and sold a hybrid combo version that swapped the 4- and 5-irons for rescues.
Finding a used set
The TaylorMade RocketBladez 2.0 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- QSponge club spec database, TaylorMade RocketBladez 2.0 irons table, which supplied every loft, lie, length and offset value here. This is the only spec table for the model that could be retrieved.
- TaylorMade official 2014 RocketBladez HL Irons spec sheet, taylormadegolf.com/on/demandware.static/-/Sites-TMaG-Library/default/v1463473265710/docs/productspecs/2014/Rocketbladez-HL-Irons.pdf — used as a cross-check. Its 4-iron-through-sand-wedge offset column (6.0, 5.7, 4.8, 4.2, 3.4, 2.7, 2.0, 1.4, 1.0 mm) matches the QSponge RocketBladez 2.0 offsets exactly, which is why offset is recorded here.
- 2nd Swing Golf and GolfEtail RocketBladez 2.0 listings, which confirm the model existed as a 2014 4-PW set with Speed Pocket and progressive offset in steel and graphite, but publish no numeric spec table.
- NOTE: no TaylorMade spec sheet for the RocketBladez 2.0 exists in the archived taylormadegolf.com productspecs/2014 directory, which does hold sheets for the RocketBladez HL, SLDR and Tour Preferred irons. Confidence is low. The recorded lengths run in an even half-inch progression (38.5, 38.0, 37.5, 37.0) rather than TaylorMade's usual 38.875/38.25/37.625/37.0 ladder of the period; that difference comes from the single source and could not be independently confirmed.
- Bounce and swing weight are omitted because no retrieved source gave them. The shaft names come from the retailer listings above and are recorded without weights or a full flex range because none was published.
Last reviewed 2026-07-22. Spot an error? [email protected]