TaylorMade RocketBladez Irons Specifications
Full factory loft, lie and length chart for the TaylorMade RocketBladez irons, 2013–2014.
- Years produced
- 2013–2014
- Category
- Game Improvement Irons
- Construction
- investment cast with Speed Pocket sole slot
- Material
- stainless steel
- Set makeup
- 3–LW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 18 | 61 | 39.5 |
| 4 | 20 | 61.5 | 38.875 |
| 5 | 23 | 62 | 38.25 |
| 6 | 26.5 | 62.5 | 37.625 |
| 7 | 30.5 | 63 | 37 |
| 8 | 35 | 63.5 | 36.5 |
| 9 | 40 | 64 | 36 |
| PW | 45 | 64.5 | 35.5 |
| AW | 50 | 64.5 | 35.5 |
| SW | 55 | 64.5 | 35.25 |
| LW | 60 | 64.5 | 35 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade RocketBladez
The RocketBladez was the first TaylorMade iron to carry the Speed Pocket, a slot cut into the sole behind the face of the long and mid irons that lets the lower face flex more and raises ball speed on shots struck low on the face. It was announced in late 2012 and sold as the 2013 game-improvement model, alongside a more compact RocketBladez Tour version with weaker lofts. The standard set is strongly lofted, with a 30.5-degree 7-iron. Specs below are the men's standard steel-shaft build.
Stock shafts
- TaylorMade RocketFuel 85 — steel · 85 g
- TaylorMade Matrix RocketFuel 65 — graphite · 65 g
Related models
- Compare: TaylorMade RocketBladez vs TaylorMade RocketBallz
- Compare: TaylorMade RocketBladez vs TaylorMade RocketBladez 2.0
- Compare: TaylorMade RocketBladez vs TaylorMade RSi 1
Frequently asked questions
What is the loft of a TaylorMade RocketBladez 7-iron?
The standard TaylorMade RocketBladez 7-iron has a loft of 30.5 degrees, with a 63-degree lie and a 37-inch steel-shaft length.
What is the Speed Pocket on the RocketBladez irons?
The Speed Pocket is a slot cut into the sole just behind the face on the long and mid irons. It lets the lower part of the face flex more at impact, which raises ball speed and launch on shots struck low on the face, where game-improvement players most often miss.
How do RocketBladez lofts compare to RocketBladez Tour?
The standard RocketBladez is considerably stronger. Its 7-iron is 30.5 degrees against roughly 33.75 degrees for the RocketBladez Tour, and its pitching wedge is 45 degrees against about 47 degrees.
Finding a used set
The TaylorMade RocketBladez is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- QSponge club spec database, TaylorMade RocketBladez irons loft/lie/length table
- 2nd Swing Golf RocketBladez iron set spec table (lofts and lies agree; its lengths are rounded and differ slightly)
- Rotary Swing review of the TaylorMade RocketBladez, which independently cites the 30.5-degree 7-iron, 20-degree 4-iron and 23-degree 5-iron
- NOTE: no manufacturer spec sheet was located. The archived taylormadegolf.com product page loads its spec table via script and did not preserve the numbers. Lofts and lies are corroborated across sources; lengths follow the TaylorMade progression of the era and come from a single source.
Last reviewed 2026-07-22. Spot an error? [email protected]