Titleist T100 Irons Specifications
Full factory loft, lie and length chart for the Titleist T100 irons, 2019–2021.
- Years produced
- 2019–2021
- Category
- Players Irons
- Construction
- forged, multi-material
- Material
- fully forged carbon steel with co-forged high-density tungsten in the heel and toe
- Set makeup
- 3–W
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 21 | 61 | 39 | 0.134 | D2 |
| 4 | 24 | 61.5 | 38.5 | 0.122 | D2 |
| 5 | 27 | 62 | 38 | 0.11 | D2 |
| 6 | 30 | 62.5 | 37.5 | 0.102 | D2 |
| 7 | 34 | 63 | 37 | 0.091 | D2 |
| 8 | 38 | 63.5 | 36.5 | 0.079 | D2 |
| 9 | 42 | 64 | 36 | 0.071 | D2 |
| PW | 46 | 64 | 35.75 | 0.059 | D2 |
| W | 50 | 64 | 35.5 | 0.051 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist T100
The T100 launched in August 2019 as the tour model of Titleist's new T-Series, replacing the AP2 line. It is a fully forged, multi-material iron in which high-density tungsten is co-forged into the heel and toe of the long and mid irons to control centre-of-gravity progression through the set. The sole uses a Variable Bounce design with a softened trailing edge for turf interaction. Lofts match the outgoing 714/716/718 AP2 family, with a 34 degree 7-iron and a 46 degree pitching wedge.
Stock shafts
- True Temper AMT Tour White — steel
Related models
- Compare: Titleist T100 vs Titleist 620 CB
- Compare: Titleist T100 vs Titleist 718 AP2
- Compare: Titleist T100 vs Titleist T100 (2021)
- Compare: Titleist T100 vs Titleist T100S
- Compare: Titleist T100 vs Titleist T150
- Compare: Titleist T100 vs Titleist T200
Frequently asked questions
What is the loft of a Titleist T100 7-iron?
The 2019 Titleist T100 7-iron has a loft of 34 degrees, with a 63 degree lie and a 37 inch standard steel length.
What is the pitching wedge loft on the Titleist T100?
The T100 pitching wedge is 46 degrees, and the matching gap wedge, badged W, is 50 degrees.
Are the Titleist T100 lofts the same as the AP2 they replaced?
Yes. The 2019 T100 uses the same lofts as the 714, 716 and 718 AP2, from a 21 degree 3-iron to a 46 degree pitching wedge, though the T100 lie angles are one degree upright in the 3 and 4 irons.
Finding a used set
The Titleist T100 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndSwing.com Titleist T100 (2019) iron set specification table (loft, lie, length, offset, swingweight, August 2019 release, AMT Tour White stock shaft)
- Titleist T100 published spec chart (loft, lie, length, offset in millimetres) as reproduced in retailer listings; offsets converted from millimetres to inches
- PGATOUR.com, 'Everything you need to know about Titleist's new T100, T200, T300, 620 MB and 620 CB irons', August 2019 - fully forged construction, co-forged tungsten, Variable Bounce sole
Last reviewed 2026-07-22. Spot an error? [email protected]