Vega Mizar Tour Irons Specifications
Full factory loft, lie and length chart for the Vega Mizar Tour irons, 2019–present.
- Years produced
- 2019–present
- Category
- Players Distance Irons
- Construction
- forged one-piece body with constant-thickness carbon steel face insert
- Material
- S25C carbon steel body, 3.5 mm S20C carbon steel face
- Set makeup
- 4–AW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Bounce |
|---|---|---|---|---|
| 4 | 20 | 60 | — | 0 |
| 5 | 23 | 60.5 | — | 2 |
| 6 | 26 | 61 | — | 2.5 |
| 7 | 30 | 61.5 | — | 2.5 |
| 8 | 34 | 62 | — | 5 |
| 9 | 38 | 62.5 | — | 7 |
| PW | 42 | 63 | — | 9 |
| AW | 46 | 63 | — | 9 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Vega Mizar Tour
The Mizar Tour is the compact multi-material iron in Vega's Star Range - a one-piece body forged from S25C carbon steel with a softer S20C face insert held at a constant 3.5 mm thickness. Weight is removed internally near the sole to keep the centre of gravity high for a flighted, penetrating ball, and moves across the head through the set. GolfWRX spotlighted the model in October 2019 and Vega's own site has carried the same loft, lie, face progression and bounce chart from at least January 2022 through the present, so the specs below describe the club as sold across its whole run; Vega later marketed it under the "next generation, multi-material" banner alongside the VDC, and reviews in late 2022 renewed attention on it. Vega builds to order through fitters and publishes no standard lengths or offsets, so those keys are omitted. The set runs 4-iron to attack wedge with a 30-degree 7-iron and 42-degree pitching wedge.
Related models
Frequently asked questions
What is the loft of a Vega Mizar Tour 7-iron?
The Vega Mizar Tour 7-iron has a loft of 30 degrees, a 61.5-degree lie and 2.5 degrees of bounce.
Is the Vega Mizar Tour forged?
Yes. The one-piece body is forged from S25C carbon steel and carries a softer S20C carbon steel face insert at a constant 3.5 mm thickness.
Is the Mizar Tour a blade?
No. It is a compact multi-material players-distance design: the constant-thickness face and internal weight removal near the sole give it distance and a penetrating flight in a players profile.
Where it sits in the lineup
Introduced in 2019, the Vega Mizar Tour is a current players distance set in the Vega range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- vega-golf.com Mizar Tour product page (archived 18 January 2022 and 9 February 2023, and current) — manufacturer spec table: lofts 20/23/26/30/34/38/42/46 for 4-AW, lies 60-63, face progression 4.5-6 mm, bounce 0-9, head weights 251-300 g, S25C body with 3.5 mm S20C face, hosel 13.4 mm OD / 33 mm depth. Vega publishes face progression rather than offset and no standard lengths, so those keys are omitted
- golfwrx.com 'WRX Spotlight: Vega Mizar Tour irons' (October 2019) — dates the model's availability to 2019 and describes the same S25C one-piece forging with constant-thickness 3.5 mm face
- golfwrx.com 'Club Junkie Review: Vega Golf VDC and Mizar Tour irons' (December 2022) — later-cycle corroboration; the archived manufacturer chart is unchanged across this period. Note: this database entry uses the 2019 first-availability date; some retail listings treat the Mizar Tour as a 2022 model from its 'next generation' remarketing
- Stock build per vega-golf.com: VEGA Stellify steel shaft with VEGA Tour Density half-cord grip; heads also sold component-only
Last reviewed 2026-07-29. Spot an error? [email protected]