Vega VDC Irons Specifications
Full factory loft, lie and length chart for the Vega VDC irons, 2021–present.
- Years produced
- 2021–present
- Category
- Players Irons
- Construction
- one-piece forged dual-cavity players cavity back
- Material
- forged carbon steel, micro-milled face
- Set makeup
- 4–PW
Data confidence: low. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 22 | 60 | — |
| 5 | 25 | 60.5 | — |
| 6 | 28 | 61 | — |
| 7 | 31 | 61.5 | — |
| 8 | 34 | 62 | — |
| 9 | 39 | 62.5 | — |
| PW | 44 | 63 | — |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Vega VDC
The VDC (Dual Cavity) sits in the middle of Vega's Japan-forged Classic Line, alongside a muscle-back VMB blade and a shallow-cavity VSC - a family the brand builds to one shared loft and lie chart so the three can be blended into a single set. GolfWRX's Club Junkie review described "fantastic milling work on the back side with dual cavities that allow Vega to adjust the CG higher on the irons for the perfect players cavity set," with a slightly squarer toe and edgier look than the Mizar range and a narrow, pre-worn leading edge for turf interaction; all three Classic Line faces are micro-milled for spin consistency. Lofts run strong for a players iron - a 31-degree 7-iron and 44-degree pitching wedge across a 4-PW factory chart - aimed at accomplished ball-strikers wanting extra distance without losing feel. Reviews clustered in late 2022 as Western coverage caught up with the Japan-forged range; stock build uses the Shimada Steel Taper Tour shaft, with a 4-PW steel set priced around £1,645 in the UK.
Stock shafts
- Shimada Steel Taper Tour — steel
Frequently asked questions
What is the loft of a Vega VDC 7-iron?
The Vega VDC 7-iron has a loft of 31 degrees and a lie of 61.5 degrees - strong for a players cavity iron, aimed at accomplished ball-strikers wanting extra distance.
How does the Vega VDC differ from the Mizar range?
The VDC belongs to Vega's separate Classic Line rather than the Star Range Mizar irons - a squarer toe, edgier look and dual-cavity milling that raises the centre of gravity, alongside Classic Line siblings VMB (blade) and VSC (shallow cavity) that share the same loft and lie chart.
What shaft comes stock in the Vega VDC?
The Shimada Steel Taper Tour, as tested by Golf Monthly in its 4-PW review set.
Where it sits in the lineup
Introduced in 2021, the Vega VDC is a current players set in the Vega range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- Golf Monthly 'Vega VDC Iron Review: The Best Iron You've Never Heard Of' (golfmonthly.com, last updated 31 October 2022) — the 4-PW factory chart used here (lofts 22/25/28/31/34/39/44 degrees, lies 60-63), the one-piece forged dual-cavity construction with circular milling inside both cavities, the Shimada Steel Taper Tour stock shaft, the £1,645 4-PW steel set price, and the 'feel players looking for more speed' target-player framing.
- GolfWRX 'Club Junkie Review: Vega Golf VDC and Mizar Tour irons' (golfwrx.com/701321) — describes the dual-cavity milling that raises the CG for a 'perfect players cavity set,' a squarer toe and narrow sole with a pre-worn leading edge for turf interaction, versus the Mizar range's shaping.
- SGGT 'Vega Classic Line VSC VMB VDC Irons Review' (sggt.co.uk) — confirms the VDC sits alongside sibling VMB (muscle-back blade) and VSC (shallow cavity) models in Vega's forged-in-Japan Classic Line, sharing one loft and lie chart across all three so they can be blended into combo sets; no direct predecessor/successor relationship between the three.
- Year and material note (confidence: medium): no source gives an exact announcement date; independent reviews cluster in October-December 2022, while this entry follows this site's convention (as with other Vega/Fourteen/Miura Japan-forged models) of recording the earlier announcement year where coverage lags - 2021 is used per the task brief pending a firmer primary source. Material is recorded generically as forged carbon steel because no source states the specific carbon-steel grade (S20C/S25C) for the VDC head specifically, unlike its Mizar Tour sibling (S25C, confirmed). Bounce, offset and length are not published for the VDC in any consulted source and are omitted rather than guessed.
Last reviewed 2026-07-29. Spot an error? [email protected]