Wilson Dynapower Irons Specifications
Full factory loft, lie and length chart for the Wilson Dynapower irons, 2023–2025.
- Years produced
- 2023–2025
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 4–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 4 | 18 | 60 | 39 | 0.256 | 2 | D2 |
| 5 | 21 | 61 | 38.5 | 0.236 | 2 | D2 |
| 6 | 24 | 61.5 | 38 | 0.216 | 2 | D2 |
| 7 | 27 | 62 | 37.5 | 0.196 | 3 | D2 |
| 8 | 32 | 63 | 37 | 0.176 | 5 | D2 |
| 9 | 37 | 63.5 | 36.5 | 0.156 | 6 | D2 |
| PW | 42 | 64 | 36 | 0.136 | 6 | D2 |
| GW | 47 | 64 | 35.75 | 0.116 | 6 | D2 |
| SW | 53 | 64 | 35.5 | 0.086 | 6 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Wilson Dynapower
Dynapower revived a historic Wilson name for 2023, replacing the D9 as the brand's distance game-improvement iron. The cast stainless steel head moves mass to the toe for a higher moment of inertia and keeps the centre of gravity low for a high launch and steep descent. Lofts and lengths carry over from the D9 unchanged: a 27-degree 7-iron at 37.5 inches and a 42-degree pitching wedge, with offset tapering from 0.236 inches at the 5-iron to 0.136 inches at the pitching wedge. The stock set is 5-iron through pitching wedge plus a 47-degree gap wedge, with a 4-iron and a 53-degree sand wedge available to match. A separate forged Dynapower model with weaker lofts was sold alongside it and is a different head.
Stock shafts
- KBS MAX Ultralite — steel · flexes: R, S
- UST Mamiya Recoil DART — graphite · flexes: A, R
Related models
- Predecessor: Wilson Staff D9
- Successor: Wilson DYNAPWR
- Compare: Wilson Dynapower vs Wilson Staff D9
- Compare: Wilson Dynapower vs Wilson DYNAPWR
Frequently asked questions
What is the loft of a Wilson Dynapower 7-iron?
The Wilson Dynapower 7-iron has a loft of 27 degrees, with a 62-degree lie and a 37.5-inch steel-shaft length.
What clubs come in a stock Wilson Dynapower set?
The stock set is 5-iron through pitching wedge plus a 47-degree gap wedge. A 4-iron and a 53-degree sand wedge are available to match.
Are the Wilson Dynapower lofts the same as the D9?
Yes. The cast Dynapower carries the D9 ladder unchanged, from an 18-degree 4-iron to a 42-degree pitching wedge, with the same lengths, lies and offsets.
Is the Dynapower Forged the same iron?
No. The forged Dynapower is a separate players-distance head with weaker lofts, including a 30.5-degree 7-iron and a 44-degree pitching wedge.
Finding a used set
The Wilson Dynapower is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Ozark Golf 'Wilson Dynapower Irons' product specification table (club, loft, lie, length, bounce, offset, steel and graphite swing weight, 5-iron through GW) and its stock 5-PW/GW set and shaft list — retrieved July 2026. Retailer table, not a Wilson spec sheet.
- 2nd Swing Golf Wilson Dynapwr iron set specification table — reproduces the same ladder and adds the 4-iron and 53-degree sand wedge.
- Golfalot 'Wilson Dynapower Irons Review' — independently confirms the 27-degree 7-iron, 37.5-inch 7-iron length, 42-degree pitching wedge, 47-degree gap wedge and the 4-PW set with optional GW and SW, plus the 2023 release.
- Swing weight shown is the steel-shaft figure; the graphite build is one point lighter at D1.
Last reviewed 2026-07-22. Spot an error? [email protected]