Wilson DYNAPWR Irons Specifications
Full factory loft, lie and length chart for the Wilson DYNAPWR irons, 2025–present.
- Years produced
- 2025–present
- Category
- Game Improvement Irons
- Construction
- cast hollow body
- Material
- stainless steel
- Set makeup
- 4–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 4 | 19 | 60 | 39 | 0.185 | D2 |
| 5 | 22 | 61 | 38.5 | 0.17 | D2 |
| 6 | 25 | 61.5 | 38 | 0.155 | D2 |
| 7 | 28 | 62 | 37.5 | 0.14 | D2 |
| 8 | 32.5 | 63 | 37 | 0.125 | D2 |
| 9 | 37.5 | 63.5 | 36.5 | 0.11 | D2 |
| PW | 42.5 | 64 | 36 | 0.095 | D2 |
| GW | 48 | 64 | 35.75 | 0.08 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Wilson DYNAPWR
DYNAPWR is the 2025 replacement for the cast Dynapower and is a different head, not a restyling of it. Wilson dropped the Power Hole slots that had run through several generations of its distance irons and moved to a hollow body with an Energy Transfer Chassis, a PKR-Cup cup face and a Velocity Optimization Channel. Lofts are half a degree to a degree weaker than the 2023 Dynapower through most of the set, with a 28-degree 7-iron against the Dynapower's 27 and a 42.5-degree pitching wedge against 42, which is unusual for a successor and reflects the higher launch the cup face produces. The set runs 4-iron through a 48-degree gap wedge and was announced on 29 January 2025 alongside a super-game-improvement DYNAPWR Max with weaker lofts again. Figures below are the standard men's steel-shaft specification.
Stock shafts
- KBS MAX Ultralite — steel · flexes: R, S
- UST Mamiya Recoil DART 65 — graphite · flexes: R
Related models
Frequently asked questions
What is the loft of a Wilson DYNAPWR 7-iron?
The Wilson DYNAPWR 7-iron has a loft of 28 degrees, with a 62-degree lie and a 37.5-inch steel-shaft length.
What clubs come in a Wilson DYNAPWR set?
The set runs 4-iron through pitching wedge plus a 48-degree gap wedge, sold as a six or seven piece set depending on the retailer.
Is the DYNAPWR the same iron as the 2023 Dynapower?
No. The 2025 DYNAPWR is a different head. It replaced the cast Dynapower's Power Hole sole slots with a hollow body, an Energy Transfer Chassis and a PKR-Cup face, and its lofts are half a degree to a degree weaker through the set.
How do DYNAPWR lofts compare with Dynapower lofts?
DYNAPWR is slightly weaker. The 7-iron is 28 degrees against the Dynapower's 27, and the pitching wedge is 42.5 degrees against 42. Lengths and lies are unchanged.
Finding a used set
The Wilson DYNAPWR is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Today's Golfer, 'Everything you need to know: 2025 Wilson DYNAPWR irons' — full launch specification table (club, loft, lie, length, offset, swing weight, 4-iron through GW), the 29 January 2025 announcement and 12 February 2025 on-sale date, stock shafts and grip. This is the only retrieved source carrying the offset column, so offsets rest on it alone.
- Fairway Jockey 'Wilson 2025 DYNAPWR Custom Irons' build page — independently reproduces the same loft, lie and length ladder for all eight clubs. Retailer table, not a Wilson spec sheet.
- Today's Golfer 'Wilson DYNAPWR irons review' (2025) — separately confirms the 28-degree 7-iron at 62 degrees lie and 37.5 inches, the 4i-GW set and the KBS MAX Ultralite / UST Recoil Dart shaft pairing.
- Plugged In Golf '2025 Wilson DYNAPWR Irons Review' — confirms the hollow body, Energy Transfer Chassis, PKR-Cup face and Velocity Optimization Channel, and that the Power Holes used by the previous generations were removed. This is the basis for treating DYNAPWR as a separate head from the 2023 Dynapower rather than a restyled name.
- Bounce is omitted: no retrieved source published a bounce column for this model. Swing weight shown is the steel-shaft figure; the graphite build is listed one point lighter at D1.
Last reviewed 2026-07-22. Spot an error? [email protected]