Cobra KING Forged Tec (2022) Irons Specifications
Full factory loft, lie and length chart for the Cobra KING Forged Tec (2022) irons, 2022–present.
- Years produced
- 2022–present
- Category
- Players Distance Irons
- Construction
- forged hollow body with a PWRSHELL face cup and foam microspheres
- Material
- forged 1025 carbon steel body with a forged PWRSHELL face and tungsten weighting
- Set makeup
- 4–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 4 | 21 | 61 | 38.75 | 0.142 | D2 |
| 5 | 23 | 61.5 | 38.25 | 0.13 | D2 |
| 6 | 26 | 62 | 37.75 | 0.118 | D2 |
| 7 | 29.5 | 62.5 | 37.25 | 0.106 | D2 |
| 8 | 34 | 63 | 36.75 | 0.094 | D2 |
| 9 | 39 | 63.5 | 36.25 | 0.083 | D2 |
| PW | 44 | 64 | 36 | 0.071 | D3 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Cobra KING Forged Tec (2022)
The 2022 KING Forged Tec is a compact hollow-bodied players-distance iron: a forged 1025 carbon steel body with a forged PWRSHELL face cup, foam microspheres behind the face for sound, and a tungsten weight low in the head. The profile is deliberately small for the category, with a relatively thin top line. Lofts are strong — 29.5 degrees at the 7-iron and 44 at the pitching wedge — and the set is built long at 37.25 inches for the 7-iron.
Stock shafts
- FST KBS $-Taper Lite — steel · flexes: R, S
Related models
- Predecessor: Cobra KING Forged Tec
- Cobra's tour iron of the same era: Cobra King MIM Tour
- Game-improvement sibling: Cobra LTDx
- Compare: Cobra KING Forged Tec (2022) vs Cobra KING Forged Tec
- Compare: Cobra KING Forged Tec (2022) vs Cobra King MIM Tour
- Compare: Cobra KING Forged Tec (2022) vs Cobra LTDx
- Compare: Cobra KING Forged Tec (2022) vs Cobra King Tour
Frequently asked questions
What is the loft of a Cobra KING Forged Tec (2022) 7-iron?
The 2022 Cobra KING Forged Tec 7-iron has a loft of 29.5 degrees, a lie of 62.5 degrees and a length of 37.25 inches.
Is the Cobra KING Forged Tec hollow?
Yes — a forged 1025 carbon steel body with a forged PWRSHELL face cup and foam microspheres inside to control the sound.
How strong are 2022 KING Forged Tec lofts?
Strong for a compact iron: 29.5 degrees at the 7-iron and 44 at the pitching wedge, about three and a half degrees stronger than a traditional players iron.
What is the stock shaft in the 2022 Cobra KING Forged Tec?
The KBS $-Taper Lite, at 115 grams in stiff and 110 grams in regular.
Where it sits in the lineup
Introduced in 2022, the Cobra KING Forged Tec (2022) is a current players distance set in the Cobra range, with no replacement announced. It replaced the Cobra KING Forged Tec. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- 2ndswing.com Cobra 2022 KING Forged Tec Iron Set specification table — loft, length, lie, offset (in millimetres) and swing weight for the 4-iron through pitching wedge, the 4-PW stock make-up, the KBS $-Taper Lite stock shaft (115g in stiff, 110g in regular) and the Lamkin Crossline grip. Offset is converted to inches here.
- Note: bounce was not published in the source consulted and is omitted rather than estimated.
Last reviewed 2026-07-28. Spot an error? [email protected]