Haywood Signature Irons Specifications
Full factory loft, lie and length chart for the Haywood Signature irons, 2020–2025.
- Years produced
- 2020–2025
- Category
- Players Distance Irons
- Construction
- two-piece hollow body (431 stainless body, welded heat-treated 17-4 face)
- Material
- 431 stainless steel body with 17-4 stainless steel face
- Set makeup
- 4–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 4 | 20.5 | 61 | 38.5 | 0.22 | 6 | D1 |
| 5 | 23 | 61.5 | 38 | 0.2 | 7 | D1 |
| 6 | 26 | 62 | 37.5 | 0.17 | 8 | D1 |
| 7 | 30 | 62.5 | 37 | 0.13 | 9 | D1 |
| 8 | 34 | 63 | 36.5 | 0.11 | 10 | D1 |
| 9 | 39 | 63.5 | 36 | 0.09 | 11 | D1 |
| PW | 44 | 64 | 35.75 | 0.08 | 12 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Haywood Signature
The Signature Series was Haywood Golf's first iron - the hollow-body model that launched the Vancouver direct-to-consumer brand's club line. A 431 stainless body is welded to a heat-treated 17-4 stainless face, giving a high-launching, distance-first head with generous progressive offset behind a fairly clean topline. It was on sale by mid-2020 and stayed in the line until the SV.2 replaced it in 2025. Lofts are strong, with a 30-degree 7-iron and 44-degree pitching wedge. The specs below are Haywood's revised 2022 chart; at launch the published lengths ran a quarter-inch longer in 4-iron through 9-iron (38.75 to 36.25 inches) with the same lofts, lies and offsets, and launch-era swing weights were listed one point heavier at D2/D3.
Related models
- Forged cavity sibling: Haywood CB
- Forged blade sibling: Haywood MB
- Compare: Haywood Signature vs Haywood CB
- Compare: Haywood Signature vs Haywood MB
Frequently asked questions
What is the loft of a Haywood Signature 7-iron?
The Haywood Signature 7-iron has a loft of 30 degrees, with a 62.5-degree lie, 37-inch length and 0.13 inches of offset.
Is the Haywood Signature forged?
No. It is a two-piece hollow-body iron - a cast 431 stainless steel body welded to a heat-treated 17-4 stainless steel face. Haywood's forged models are the CB and MB.
When was the Haywood Signature sold?
It launched Haywood's iron line in 2020 and remained the brand's game-improvement-leaning distance iron until the SV.2 replaced it in 2025.
Finding a used set
The Haywood Signature ran from 2020 to 2025 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- haywoodgolf.com Signature Series spec sheet (archived 16 March 2022) — full chart used here: lofts 20.5/23/26/30/34/39/44, lengths 38.5 to 35.75 inches, lies 61-64, offsets 0.22 to 0.08 inches, bounce 6-12, swing weights D1/D2
- haywoodgolf.com Signature Irons spec sheet (archived 12 August 2020) — launch-era chart with identical lofts, lies, offsets and bounce but lengths 38.75 to 35.75 inches and swing weights D2/D3, fixing the 2020 availability and the later length revision
- golf.com ClubTest coverage (February 2021 and 2022) — two-piece hollow 431 + 17-4 stainless construction, 4-PW set composition, distance-first character
- britishcolumbiagolf.org profile of Haywood Golf — Vancouver-based direct-to-consumer brand founded by Joshua Haywood in 2018, wedges first, then irons
Last reviewed 2026-07-29. Spot an error? [email protected]