Haywood CB Irons Specifications
Full factory loft, lie and length chart for the Haywood CB irons, 2021–present.
- Years produced
- 2021–present
- Category
- Players Irons
- Construction
- forged and 100% CNC-milled
- Material
- 1020 carbon steel
- Set makeup
- 4–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 4 | 23 | 60.5 | 38.5 | 0.11 | 3 | D2 |
| 5 | 26 | 61 | 38 | 0.1 | 4 | D2 |
| 6 | 30 | 61.5 | 37.5 | 0.09 | 5 | D2 |
| 7 | 34 | 62 | 37 | 0.08 | 6 | D2 |
| 8 | 38 | 62.5 | 36.5 | 0.07 | 7 | D2 |
| 9 | 42 | 63 | 36 | 0.06 | 8 | D2 |
| PW | 46 | 63.5 | 35.75 | 0.05 | 9 | D3 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Haywood CB
The Haywood CB is the Canadian direct-to-consumer brand's forged cavity back, announced on 2 November 2021 alongside the second-generation MB as the "2022 Haywood CB & MB". Heads are forged from 1020 carbon steel and then fully CNC-milled to final spec, which Haywood credits with some of the tightest weight tolerances in the industry. Perimeter weighting and a slightly wider sole than the MB add forgiveness while sharing the MB's traditional loft ladder - a 34-degree 7-iron and 46-degree pitching wedge - so the two blend cleanly into combo sets. Sold 4-PW, built to order with Haywood's shaft menu rather than a single stock shaft. Swing weights below are from the launch spec sheet; Haywood's current chart restates them as D1/D2 for a 110-gram shaft build.
Related models
- Blade sibling: Haywood MB
- Hollow distance sibling: Haywood Signature
- Compare: Haywood CB vs Haywood Signature
Frequently asked questions
What is the loft of a Haywood CB 7-iron?
The Haywood CB 7-iron has a loft of 34 degrees, with a 62-degree lie, 37-inch length and 0.08 inches of offset.
Is the Haywood CB forged or cast?
Forged. Heads are forged from 1020 carbon steel and then 100% CNC-milled to final shape and weight.
Can the Haywood CB be combined with the MB?
Yes. The CB and MB share the same lofts, lies and lengths club-for-club, so Haywood sells them as CB/MB combo sets - typically CB long irons into MB short irons.
Where it sits in the lineup
Introduced in 2021, the Haywood CB is a current players set in the Haywood range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- haywoodgolf.com Haywood CB spec sheet (archived 3 December 2021, image asset dated 2 November 2021) — full launch chart used here: lofts 23/26/30/34/38/42/46, lengths 38.5 to 35.75 inches, lies 60.5-63.5, offsets 0.11 to 0.05 inches, bounce 3-9, swing weights D2/D3
- haywoodgolf on X/Twitter, 2 November 2021: 'Proudly introducing: The 2022 Haywood CB & MB Irons' — fixes the announcement date; TXG reviewed the pair the following day
- fairwayjockey.com Haywood CB custom irons listing — independent corroboration of the loft/lie/length chart and D2/D3 swing weights, 1020 carbon steel, 100% milled
- haywoodgolf.com current CB page — same lofts, lengths, lies, offsets and bounce; swing weights restated as D1/D2 based on a 110 g shaft
Last reviewed 2026-07-29. Spot an error? [email protected]