Mizuno MP-52 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-52 irons, 2008–2010.
- Years produced
- 2008–2010
- Category
- Players Irons
- Construction
- forged
- Material
- 1025E mild carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 21 | 59.5 | 38.75 | 0.142 | 1 |
| 4 | 24 | 60 | 38.25 | 0.134 | 1 |
| 5 | 27 | 60.5 | 37.75 | 0.134 | 2 |
| 6 | 31 | 61 | 37.25 | 0.13 | 2 |
| 7 | 35 | 61.5 | 36.75 | 0.126 | 3 |
| 8 | 39 | 62 | 36.25 | 0.126 | 3 |
| 9 | 43 | 62.5 | 35.75 | 0.114 | 4 |
| PW | 47 | 63 | 35.5 | 0.114 | 5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-52
The MP-52 is a Grain Flow Forged cavity back and was the widest-sole, most forgiving iron in the MP line when it launched. It keeps the MP loft progression of its predecessor the MP-60, with a 35-degree 7-iron and a 47-degree pitching wedge, and carries slightly less offset than the MP-60 through the long irons. The stock set was 3-PW with a double nickel chrome finish. Lengths and lofts listed are the standard men's steel-shaft specification.
Stock shafts
- True Temper Dynamic Gold — steel · flexes: R300, S300
- Rifle Project X 5.5 — steel
Related models
- Predecessor: Mizuno MP-60
- Sibling model introduced the same day: Mizuno MP-62
- Successor: Mizuno MP-53
- Contemporary MP cavity back: Mizuno MP-57
- Compare: Mizuno MP-52 vs Mizuno MP-60
- Compare: Mizuno MP-52 vs Mizuno MP-53
- Compare: Mizuno MP-52 vs Mizuno MP-62
- Compare: Mizuno MP-52 vs Mizuno MP-57
Frequently asked questions
What is the loft of a Mizuno MP-52 7-iron?
The Mizuno MP-52 7-iron has a loft of 35 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
What is the pitching wedge loft on the Mizuno MP-52?
The MP-52 pitching wedge is 47 degrees at 35.5 inches, which is several degrees weaker than a modern game-improvement pitching wedge.
How does the MP-52 compare with the MP-57?
They share identical lofts, lies and lengths, and both were sold as 3-PW sets. The MP-57 carries noticeably more offset, 0.161 inches at the 3-iron against 0.142 inches on the MP-52.
Finding a used set
The Mizuno MP-52 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TheSandTrap.com Mizuno MP-52 irons review, reproducing Mizuno's published spec table (loft, lie, length, offset, bounce for 3-PW), the 1025E Grain Flow Forged construction, stock shafts and Golf Pride M-21 grip
- Golfalot Mizuno MP-52 irons review, corroborating the same loft, lie, length, offset and bounce table
- Note: year_discontinued is taken as the year the successor model was introduced.
- Note: the MP-52 was introduced on 30 September 2008, not 2007. TheSandTrap's launch piece 'Mizuno Introduces MP-52, MP-62, MX-100 and MX-200 Irons' is datelined 30 September 2008 and says the sets 'are available at authorized Mizuno dealers as we speak'. Corrected to 2008.
- Note: the MP-52 and MP-62 were introduced in that same announcement and are therefore siblings, not a succession; the successor field previously named the MP-62 and is corrected to the MP-53, which carries the MP-52's 0.142-inch 3-iron offset forward where the MP-63 carries the MP-62's smaller 0.122 inches. This mirrors the MP-53/MP-63 pair, which were likewise launched together.
Last reviewed 2026-07-22. Spot an error? [email protected]