Mizuno MP-62 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-62 irons, 2008–2010.
- Years produced
- 2008–2010
- Category
- Players Irons
- Construction
- forged
- Material
- 1025E mild carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 21 | 59.5 | 38.75 |
| 4 | 24 | 60 | 38.25 |
| 5 | 27 | 60.5 | 37.75 |
| 6 | 31 | 61 | 37.25 |
| 7 | 35 | 61.5 | 36.75 |
| 8 | 39 | 62 | 36.25 |
| 9 | 43 | 62.5 | 35.75 |
| PW | 47 | 63 | 35.5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-62
The MP-62 is a Grain Flow Forged players cavity back built around a dual muscle design, with mass split between a low bar and an upper pad to keep the centre of gravity central in a blade-sized head. It has a thin topline, minimal offset and a rounded sole grind, and was played on tour by Luke Donald among others. Lofts run 21 degrees at the 3-iron to 47 degrees at the pitching wedge, with a 35-degree 7-iron, and the stock set was 3-PW. Lengths and lofts listed are the standard men's steel-shaft specification.
Stock shafts
- True Temper Dynamic Gold — steel · flexes: R300, S300
- Project X 5.5 — steel
Related models
Frequently asked questions
What is the loft of a Mizuno MP-62 7-iron?
The Mizuno MP-62 7-iron has a loft of 35 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
What is the set makeup of the Mizuno MP-62?
The stock set was 3-iron through pitching wedge, eight clubs, with lofts running from 21 to 47 degrees.
Are the Mizuno MP-62 irons forged?
Yes. The heads are Grain Flow Forged from 1025E mild carbon steel and use a dual muscle back rather than a full cavity.
Finding a used set
The Mizuno MP-62 ran from 2008 to 2010 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- eHow / Livestrong 'Mizuno MP 62 Specs' article reproducing Mizuno's loft, lie and length chart for 3-PW plus the D1-D3 swing weight range and Dynamic Gold R300/S300 stock shafts
- IndependentGolfReviews.com Mizuno MP-62 review for the 3-PW stock makeup, Project X 5.5 shaft, Grain Flow Forged construction and dual muscle back design
- 2ndswing.com Mizuno MP-62 iron set listing, corroborating the minimal-offset dual muscle description
- Note: Mizuno's per-club offset and bounce figures for the MP-62 could not be corroborated, so those keys are omitted rather than estimated.
- Note: year_discontinued is taken as the year the successor model was introduced.
- Note: the MP-62 and MP-52 were introduced in the same announcement, datelined 30 September 2008 (TheSandTrap, 'Mizuno Introduces MP-52, MP-62, MX-100 and MX-200 Irons'), so the MP-52 is a sibling rather than a predecessor and that field is now unset.
- Note: the successor field previously named the MP-53. The MP-53 and MP-63 were launched together on 8 September 2010, and it is the MP-63 that continues the MP-62's minimal-offset design, so the field is corrected to the MP-63 and year_discontinued moves from 2009 to 2010 accordingly.
Last reviewed 2026-09-05. Spot an error? info@loftchart.com