Ping i20 Irons Specifications
Full factory loft, lie and length chart for the Ping i20 irons, 2012–2014.
- Years produced
- 2012–2014
- Category
- Players Irons
- Construction
- investment cast
- Material
- 17-4 stainless steel
- Set makeup
- 3–LW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 3 | 21 | 59.25 | 38.75 | 0.24 | 4 | D0 |
| 4 | 24 | 60 | 38.25 | 0.2 | 5 | D0 |
| 5 | 27 | 60.75 | 37.75 | 0.17 | 6 | D0 |
| 6 | 30 | 61.5 | 37.25 | 0.13 | 7 | D0 |
| 7 | 33 | 62.25 | 36.75 | 0.1 | 8 | D0 |
| 8 | 37 | 63 | 36.25 | 0.08 | 9 | D0 |
| 9 | 41 | 63.75 | 35.75 | 0.06 | 10 | D0 |
| PW | 46 | 64 | 35.5 | 0.05 | 12 | D2 |
| UW | 50 | 64 | 35.5 | 0.04 | 13 | D2 |
| SW | 54 | 64.25 | 35.25 | 0.04 | 14 | D4 |
| LW | 58 | 64.5 | 35 | 0.03 | 13 | D6 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Ping i20
The i20 keeps the i15's loft, lie and length chart unchanged and reworks everything around it: a matte black finish, a slightly larger but thinner profile, and a sole that swaps the i15's negative long-iron bounce for a conventional progressive one running 4 degrees at the 3-iron to 14 at the sand wedge. Offset is cut throughout, from 0.26 to 0.24 inches at the 3-iron and 0.14 to 0.10 at the 7-iron. Lies below are the black (standard) code.
Stock shafts
- Ping CFS — steel
- Ping AWT — steel
- Ping TFC 189i — graphite
Related models
- Predecessor: Ping i15
- Successor: Ping i25
- Game-improvement sibling: Ping G20
- Ping's tour iron of the same era: Ping S56
- Compare: Ping i20 vs Ping G20
- Compare: Ping i20 vs Ping S56
Frequently asked questions
What is the loft of a Ping i20 7-iron?
The Ping i20 7-iron has a loft of 33 degrees, a standard (black dot) lie of 62.25 degrees and a steel-shaft length of 36.75 inches.
When were Ping i20 irons made?
The i20 was the 2012 model in Ping's i-series, following the i15 and preceding the i25.
Are Ping i15 and i20 lofts the same?
Yes, club for club: 21, 24, 27, 30, 33, 37, 41 and 46 degrees from 3-iron to pitching wedge, at the same lies and lengths. The i20 carries less offset and a conventional positive-bounce sole where the i15 ran negative bounce in the long irons.
How much offset does a Ping i20 7-iron have?
0.10 inches, against 0.14 inches on the i15.
Finding a used set
The Ping i20 ran from 2012 to 2014 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- thesandtrap.com 'PING i20 Irons Review' — the full length, loft, lie, offset, bounce and swing-weight table for the 3-iron to lob wedge.
- 2ndswing.com Ping i20 Iron Set page — independently corroborates the offset column club for club (0.24 at the 3-iron down to 0.03 at the lob wedge). Its length and lie columns do not match the review's and were not used; they duplicate the values 2ndswing also prints for the i10 and i15.
- swingyard.com 'PING Irons by Year' — lists 2012 as the i20's year, and the i25 as its replacement. Ping showed the i20 in the autumn before that retail year, so some listings date it 2011.
- Note: year_discontinued is 2014 — Ping announced the successor i25 line on 2 January 2014 (Ping 2014-line press release, Golf Channel coverage), per the successor-announcement convention.
Last reviewed 2026-07-28. Spot an error? [email protected]