TaylorMade AeroBurner Irons Specifications

Full factory loft, lie and length chart for the TaylorMade AeroBurner irons, 2015–2016.

Years produced: 2015–2016
Category: Game Improvement Irons
Construction: investment cast with Speed Pocket in the 4 to 7 irons
Material: stainless steel
Set makeup: 4–SW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the TaylorMade AeroBurner irons.
Club	Loft (°)	Lie (°)	Length (in)	Offset (in)
4	19	61	38.88	0.268
5	22	61.75	38.25	0.248
6	25.5	62.5	37.63	0.228
7	29.5	63	37	0.209
8	33.5	63.5	36.5	0.181
9	38	64	36	0.161
PW	43	64.5	35.5	0.138
AW	49	64.5	35.25	0.118
SW	55	64.5	35	0.098

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the TaylorMade AeroBurner

The AeroBurner revived the Burner name for TaylorMade's 2015 distance iron, taking over the slot the SpeedBlade had occupied since late 2013. The head is large and keeps a near-constant size through the set rather than shrinking toward the short irons, with a low centre of gravity, a Speed Pocket in the 4 to 7 irons and strong lofts — a 19-degree 4-iron and a 29.5-degree 7-iron. A weaker-lofted AeroBurner HL companion model was sold alongside it. The M2 took over as TaylorMade's distance iron in 2016. Specs below are the men's standard steel-shaft build.

Stock shafts

TaylorMade Reax 88 HL — steel · flexes: R, S
TaylorMade Reax 60 AeroBurner — graphite

Related models

Frequently asked questions

What is the loft of a TaylorMade AeroBurner 7-iron?

The TaylorMade AeroBurner 7-iron has a loft of 29.5 degrees, with a 63-degree lie and a 37-inch steel-shaft length.

What is the difference between the AeroBurner and AeroBurner HL irons?

The HL is the higher-launching version with weaker lofts — a 20-degree 4-iron and 43.5-degree pitching wedge against 19 and 43 degrees on the standard model — while sharing the same large head style and offsets.

Do the AeroBurner irons have a Speed Pocket?

Yes, the 4- through 7-irons carry TaylorMade's Speed Pocket slot in the sole to help ball speed on shots struck low on the face. The short irons and wedges use a conventional sole.

What replaced the AeroBurner irons?

The TaylorMade M2, announced in 2016, took over as the company's mainstream distance iron.

Finding a used set

The TaylorMade AeroBurner ran from 2015 to 2016 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:

QSponge club spec database, TaylorMade AeroBurner irons table — loft, lie, length and offset (in mm, converted to inches here) for the 4-iron through sand wedge.
2nd Swing Golf TaylorMade AeroBurner Iron Set spec table — agrees with QSponge on every loft, lie and length, and supplies the Reax 88 HL steel and Reax 60 AeroBurner graphite stock shafts.
golfalot.com AeroBurner irons review (March 2015) — independently confirms the 19-degree 4-iron and the 2015 launch.
TaylorMade official 2015 AeroBurner HL Irons sell sheet, taylormadegolf.com/docs/productspecs/2015/Aeroburner-HL-Irons.pdf — used only to distinguish the standard model from the weaker-lofted HL (20-degree 4-iron, 43.5-degree PW); the offsets recorded here match its offset column for the same head family.
NOTE: no manufacturer sell sheet for the standard AeroBurner iron was located, so the numbers rest on the two matching retailer/database tables above. Swing weight and bounce are omitted as uncorroborated.

Last reviewed 2026-07-28. Spot an error? [email protected]