TaylorMade SpeedBlade Irons Specifications

Full factory loft, lie and length chart for the TaylorMade SpeedBlade irons, 2013–present.

Years produced
2013–present
Category
Game Improvement Irons
Construction
cast with a through-slot Speed Pocket in the 3 to 7 irons
Material
cast stainless steel
Set makeup
3–LW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the TaylorMade SpeedBlade irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)Swing wt
31760.2539.50.248D2.5
4206138.8750.228D2.5
52361.7538.250.205D2.5
626.562.537.6250.177D2.5
730.563370.154D2.5
834.563.536.50.122D2.5
939.564360.098D2.5
PW4564.535.50.079D2.5
AW5064.535.50.051D2.5
SW5564.535.250.035D3.5
LW6064.5350.035D4.5

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the TaylorMade SpeedBlade

SpeedBlade carried over the RocketBladez idea — a handlebar-shaped slot cut through the sole of the 3 to 7 irons so a larger area of the face can flex at impact. Lofts are strong even by the standards of the period, with a 30.5-degree 7-iron and a 17-degree 3-iron, and the set extends to a 60-degree lob wedge. Offset is large in the long irons, 6.3 mm at the 3-iron, and falls to under a millimetre in the wedges.

Stock shafts

Related models

Frequently asked questions

What is the loft of a TaylorMade SpeedBlade 7-iron?

The TaylorMade SpeedBlade 7-iron has a loft of 30.5 degrees, a lie of 63.0 degrees and a length of 37.0 inches.

When were TaylorMade SpeedBlade irons made?

They were introduced in 2013 and reached retail on 4 October 2013. TaylorMade ran several overlapping game-improvement models around it, so there is no single clean replacement.

Which SpeedBlade irons have the Speed Pocket?

The 3 through 7-irons. The slot is cut all the way through the sole in those heads and omitted in the short irons and wedges.

Where it sits in the lineup

Introduced in 2013, the TaylorMade SpeedBlade is a current game improvement set in the TaylorMade range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.

Data compiled from:
  • 2nd Swing Golf specification table for the TaylorMade SpeedBlade iron set (https://www.2ndswing.com/golf-clubs/iron-sets/taylormade-speedblade-iron-set) — supplied every loft, lie, length, offset and swing weight above and both stock shafts.
  • Note on offset: the source publishes offset in millimetres (6.3 mm down to 0.9 mm), converted to inches here.
  • golfbusinessnews.com 'TaylorMade Golf Introduces SpeedBlade Irons' — announced in 2013 with retail availability from 4 October 2013; the Speed Pocket runs through the sole of the 3 to 7 irons.
  • Note: bounce is omitted — the source table did not carry a bounce column. Confidence is medium.
  • Note on succession: TaylorMade ran overlapping game-improvement models in this period — RocketBladez, RocketBladez 2.0, SpeedBlade, then the RSi family — and the sources retrieved do not establish a clean one-to-one replacement, so successor, predecessor and year_discontinued are left null rather than asserted.

Last reviewed 2026-07-28. Spot an error? [email protected]