TaylorMade Burner Bubble Irons Specifications
Full factory loft, lie and length chart for the TaylorMade Burner Bubble irons, 1993–1996.
- Years produced
- 1993–1996
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel, foam-filled head
- Set makeup
- 1–SW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 1 | 16 | 56 | 39.5 |
| 2 | 19 | 57 | 39 |
| 3 | 21 | 58 | 38.5 |
| 4 | 24 | 59 | 38 |
| 5 | 27 | 60 | 37.5 |
| 6 | 30 | 61 | 37 |
| 7 | 33 | 62 | 36.5 |
| 8 | 37 | 63 | 36 |
| 9 | 42 | 64 | 35.5 |
| PW | 47 | 64 | 35.25 |
| AW | 52 | 64 | 35 |
| SW | 56 | 64 | 34.75 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade Burner Bubble
Introduced in 1993 as the Burner Midsize, this foam-filled cast stainless cavityback became the Burner Bubble mid-size iron when TaylorMade paired it with the copper-coloured Bubble graphite shaft from 1995, the pairing most 90s golfers know it by. The foam filling let weight move to the perimeter while damping vibration, and the set ran from a 16-degree 1-iron through a 56-degree sand wedge with a 33-degree 7-iron and 47-degree pitching wedge. It was succeeded in 1996 by the larger Burner Bubble Oversize. Specs below are TaylorMade's published men's table; women's builds ran an inch shorter with no 1-iron.
Stock shafts
- TaylorMade Burner Bubble — graphite
Related models
- Predecessor cavityback: TaylorMade ICW 11
- Successor: TaylorMade Burner Oversize (Burner Bubble Oversize)
- Later Bubble-era iron: TaylorMade Burner LCG
- Compare: TaylorMade Burner Bubble vs TaylorMade ICW 11
- Compare: TaylorMade Burner Bubble vs TaylorMade Burner Oversize
- Compare: TaylorMade Burner Bubble vs TaylorMade Burner LCG
Frequently asked questions
What is the loft of a TaylorMade Burner Bubble 7-iron?
The Burner Bubble mid-size 7-iron has a loft of 33 degrees, with a 62-degree lie and a 36.5-inch men's length.
Are the Burner Bubble and Burner Midsize the same iron?
Yes. The head launched in 1993 as the foam-filled Burner Midsize; from 1995 TaylorMade sold it with the copper Bubble graphite shaft and marketed the combination as the Burner Bubble iron, before the Oversize head replaced it in 1996.
What clubs came in the Burner Bubble set?
TaylorMade published specs from a 16-degree 1-iron through a 56-degree sand wedge, including a 52-degree attack wedge. Women's sets ran an inch shorter and started at the 2-iron.
Finding a used set
The TaylorMade Burner Bubble ran from 1993 to 1996 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TaylorMade official vintage-clubs archive, Burner Midsize irons specification table (club, loft, lie, men's and women's shaft lengths, 1-SW), taylormadegolf.com/vintage_detail.asp irons pages, 2006 capture via web.archive.org
- TaylorMade Irons Legacy timeline: Burner Midsize under 1993 ('unique foam-filled club head for added weight distribution around the perimeter'), Burner Bubble Oversized under 1996; pitchmarks.com's TaylorMade Burner irons history corroborates the 1993 date and foam-filled construction
- Naming note: the heads are stamped Burner Midsize; 'Burner Bubble' became the common name once the Bubble shaft was fitted from 1995, and TaylorMade's own 1997 proshop pages grouped the mid-size and Oversize models together as Burner Bubble irons
Last reviewed 2026-07-29. Spot an error? [email protected]