TaylorMade P790 (2019) Irons Specifications

Full factory loft, lie and length chart for the TaylorMade P790 (2019) irons, 2019–2021.

Check TaylorMade P790 (2019) prices on eBay Affiliate link — we may earn a commission at no extra cost to you.
Years produced
2019–2021
Category
Players Distance Irons
Construction
forged hollow body
Material
forged 4140 carbon steel face with an 8620 carbon steel body
Set makeup
3–AW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the TaylorMade P790 (2019) irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)Swing wt
31960.5390.138D2
4216138.50.134D2
523.561.5380.122D2
626.56237.50.114D2
730.562.5370.106D2
8356336.50.094D2
94063.5360.083D2
PW456435.750.071D3
AW506435.50.063D3

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop TaylorMade P790 (2019)

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

TaylorMade P790 (2019) loft by clubColumn chart of loft in degrees for each club in the set: 3 19, 4 21, 5 23.5, 6 26.5, 7 30.5, 8 35, 9 40, PW 45, AW 50.0°10°20°30°40°50°3: 19°19°3+24: 21°21°4+2.55: 23.5°23.5°5+36: 26.5°26.5°6+47: 30.5°30.5°7+4.58: 35°35°8+59: 40°40°9+5PW: 45°45°PW+5AW: 50°50°AWClubGapLoft
Loft for each club, 3 to AW. The Gap row is the loft added from one club to the next; gaps run from 2° to 5°.
TaylorMade P790 (2019) 7-iron loft angleSide view of the club face tilted 30.5 degrees back from vertical, the loft of the 7-iron.30.5°VerticalFaceTarget
The 7-iron face, drawn at its 30.5° loft from the chart. Head shape is schematic, not to scale.

About the TaylorMade P790 (2019)

The second-generation P790 keeps the original's loft chart exactly — 30.5 degrees at the 7-iron, 45 at the pitching wedge — and changes the build around it. The forged face is thinner, the internal SpeedFoam is reformulated and the tungsten weight is repositioned, while the set is a quarter inch longer than the 2017 model through the mid irons at 37.00 inches for the 7-iron. Offset also drops slightly in the long irons. Figures below are the men's standard right-handed steel build.

Stock shafts

Related models

Frequently asked questions

What is the loft of a TaylorMade P790 (2019) 7-iron?

The 2019 P790 7-iron has a loft of 30.5 degrees, a lie of 62.5 degrees and a steel-shaft length of 37.00 inches.

Are 2017 and 2019 P790 lofts different?

No. Both use 19, 21, 23.5, 26.5, 30.5, 35, 40, 45 and 50 degrees from 3-iron to approach wedge. The 2019 set is built a quarter inch longer through the mid irons and carries slightly less long-iron offset.

When were the 2019 P790 irons replaced?

In 2021, by the third-generation P790, which kept the same loft chart again and moved to the lighter SpeedFoam Air.

What is the pitching wedge loft on the 2019 P790?

45 degrees, with a 50-degree approach wedge below it.

Finding a used set

The TaylorMade P790 (2019) ran from 2019 to 2021 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • 2ndswing.com TaylorMade 2019 P790 Iron Set specification table — loft, lie, length, offset (in millimetres) and swing weight for the 3-iron through approach wedge, the 4-PW stock make-up, the Dynamic Gold 105 VSS and UST Recoil SmacWrap shafts and the Golf Pride Tour Velvet grip. Offset is converted to inches here.
  • golfalot.com 'TaylorMade P790 2019 Irons Review' — confirms the 2019 model year and the SpeedFoam change.
  • Note: bounce was not published in the source consulted and is omitted rather than estimated. Swing weight is quoted for the steel build; the source also lists a D0 graphite figure.

Last updated 28 July 2026. Spot an error? info@loftchart.com