TaylorMade RSi 2 Irons Specifications
Full factory loft, lie and length chart for the TaylorMade RSi 2 irons, 2015–2016.
- Years produced
- 2015–2016
- Category
- Players Distance Irons
- Construction
- cast/forged hybrid
- Material
- cast stainless steel with tungsten weighting and forged carbon steel short-iron face
- Set makeup
- 2–SW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 2 | 17 | 60 | 39.25 | 0.205 | -0.5 | D2 |
| 3 | 19 | 60.5 | 38.75 | 0.189 | 0 | D2 |
| 4 | 21 | 61 | 38.25 | 0.173 | 1 | D2 |
| 5 | 24 | 61.5 | 37.75 | 0.157 | 2 | D2 |
| 6 | 27 | 62 | 37.25 | 0.142 | 3 | D2 |
| 7 | 31 | 62.5 | 36.75 | 0.126 | 4 | D2 |
| 8 | 35 | 63 | 36.25 | 0.11 | 6 | D2 |
| 9 | 40 | 63.5 | 35.75 | 0.094 | 8 | D2 |
| PW | 45 | 64 | 35.5 | 0.079 | 10 | D3 |
| AW | 50 | 64 | 35.5 | 0.063 | 11 | D3 |
| SW | 55 | 64 | 35.25 | 0.055 | 12 | D5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade RSi 2
The RSi 2 sat above the RSi 1 in TaylorMade's 2015 iron range, offering the same Face Slot and ThruSlot Speed Pocket technologies in a more compact multi-material head. The long irons are cast with tungsten weighting low in the toe to lower the centre of gravity, while the short irons use a forged carbon steel face with milled grooves for feel and control. Lofts are about half a degree to a degree weaker than the RSi 1, with a 31-degree 7-iron and a 45-degree pitching wedge, and the published range runs from a 2-iron to a 55-degree sand wedge. Specs below are the men's standard steel-shaft build with the KBS Tour 105 shaft.
Stock shafts
- KBS Tour 105 — steel · 105 g · flexes: R, S
- Matrix Program F15 — graphite · flexes: R, S
Related models
Frequently asked questions
What is the loft of a TaylorMade RSi 2 7-iron?
The TaylorMade RSi 2 7-iron has a loft of 31 degrees, with a 62.5-degree lie and a 36.75-inch steel-shaft length.
Are the TaylorMade RSi 2 irons forged?
Partly. The RSi 2 uses progressive multi-material construction: the long irons are cast with tungsten weighting low in the toe, while the short irons have a forged carbon steel face with milled grooves. It is not a fully forged iron.
How do the RSi 2 lofts compare to the RSi 1?
The RSi 2 is marginally weaker. Its 7-iron is 31 degrees against 30.5 for the RSi 1 and its pitching wedge is 45 degrees against 44. The RSi 2 also uses a shorter length ladder, with a 36.75-inch 7-iron versus 37 inches.
Finding a used set
The TaylorMade RSi 2 ran from 2015 to 2016 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TaylorMade official 2015 RSi Irons sell sheets, RSi 2 page (full spec table: loft, lie, offset in mm, bounce, length, swingweight, KBS Tour 105 steel and Matrix Program F15 graphite shafts), taylormadegolf.com/docs/productspecs/2015/RSi-Irons-Sell-Sheets.pdf
- TaylorMade RSi 2 product description (cast long irons with tungsten weighting, forged carbon steel short-iron face with milled grooves) — construction/material only, not the spec numbers
Last reviewed 2026-09-05. Spot an error? info@loftchart.com