TaylorMade RSi TP Irons Specifications

Full factory loft, lie and length chart for the TaylorMade RSi TP irons, 2015–2015.

Years produced: 2015–2015
Category: Players Irons
Construction: two-piece plasma-welded forged face and hosel with stainless back in the 3-7 irons, fully forged short irons
Material: forged carbon steel with a cast stainless steel back piece in the long and mid irons
Set makeup: 2–PW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the TaylorMade RSi TP irons.
Club	Loft (°)	Lie (°)	Length (in)	Offset (in)	Bounce	Swing wt
2	17	60	39.25	0.126	-1	D2
3	20	60.5	38.75	0.118	0	D2
4	23	61	38.25	0.106	0.5	D2
5	26	61.5	37.75	0.091	2	D2
6	30	62	37.25	0.079	3.5	D2
7	34	62.5	36.75	0.071	5	D2
8	38	63	36.25	0.067	7	D2
9	42	63.5	35.75	0.063	8	D3
PW	47	64	35.5	0.059	9	D3

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the TaylorMade RSi TP

The RSi TP sat at the top of TaylorMade's 2015 RSi family, pairing the range's Face Slot Technology with a forged players head. In the 3- through 7-irons a forged carbon steel face and hosel is plasma-welded to a stainless steel back, while the 8-iron to pitching wedge are conventional forged heads with a slight muscle cavity. Lofts are traditional rather than jacked — a 34-degree 7-iron and 47-degree pitching wedge — and the published range runs from a 2-iron to the pitching wedge, with 3-PW the normal set. It was replaced by the PSi Tour, announced in late 2015.

Related models

Frequently asked questions

What is the loft of a TaylorMade RSi TP 7-iron?

The RSi TP 7-iron has a loft of 34 degrees, with a 62.5-degree lie and a 36.75-inch length — traditional players-iron lofts rather than the strong lofts of the RSi 1.

Are the TaylorMade RSi TP irons forged?

Partly. The 3- through 7-irons plasma-weld a forged carbon steel face and hosel to a stainless steel back, while the 8-iron through pitching wedge are fully forged heads with a slight muscle cavity.

Do the RSi TP irons have Face Slots?

Yes — the 3- through 7-irons carry the same Face Slot Technology as the rest of the RSi family to protect ball speed on heel and toe strikes.

Finding a used set

The TaylorMade RSi TP ran from 2015 to 2015 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:

golfclubspec.com iron specification database via qsponge.com 'What is loft angle of TaylorMade RSi TP Irons' — supplied every loft, lie, length, bounce, offset and swing weight above; offsets published in millimetres (3.2 mm down to 1.5 mm) and converted to inches here.
pluggedingolf.com TaylorMade RSi TP irons review — independently corroborates the 34-degree 7-iron and describes the forged construction and Face Slots in the 3-7 irons.
mygolfspy.com 'FIRST LOOK - 2015 TaylorMade RSi Irons' — the RSi family launched for the 2015 season; the TP model followed the RSi 1 and RSi 2 to retail in early 2015. year_discontinued is 2015 because the PSi and PSi Tour, its replacements, were announced that autumn.
Note: stock_shafts is omitted — no accessible source stated the stock shaft for the TP model with confidence. Confidence is medium: the full table comes from a secondary spec database, corroborated on key values by reviews.

Last reviewed 2026-07-29. Spot an error? [email protected]