Wilson Staff C200 Irons Specifications
Full factory loft, lie and length chart for the Wilson Staff C200 irons, 2016–2017.
- Years produced
- 2016–2017
- Category
- Players Distance Irons
- Construction
- investment cast, multi-material
- Material
- stainless steel with TE031 urethane perimeter
- Set makeup
- 3–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 19 | 59.5 | 39.5 |
| 4 | 22 | 60 | 39 |
| 5 | 25 | 61 | 38.5 |
| 6 | 28 | 61.5 | 38 |
| 7 | 32 | 62 | 37.5 |
| 8 | 36 | 63 | 37 |
| 9 | 40 | 63.5 | 36.5 |
| PW | 44 | 64 | 35.75 |
| GW | 48 | 64.5 | 35.5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Wilson Staff C200
The C200 launched Wilson's C (crossover) category, sitting between the distance-first D line and the tour-focused FG Tour models. Its FLX Face construction cuts material away where the face meets the body - Wilson claimed 76 percent of the face is not touching the chassis - with the resulting Power Holes filled by black TE031 urethane, letting the whole face flex for ball speed in a mid-sized head a better player can still work. Lofts are only moderately strong, with a 32-degree 7-iron and a 44-degree pitching wedge. The stock set is 4-iron through gap wedge with an optional 3-iron for right-handers; figures below are the standard men's steel specification.
Stock shafts
- KBS Tour 90 — steel
- Aldila Rogue Pro — graphite
Related models
- Later C-series: Wilson Staff C300 Forged
- Sibling D-series: Wilson Staff D200
- Compare: Wilson Staff C200 vs Wilson Staff C300 Forged
- Compare: Wilson Staff C200 vs Wilson Staff D200
Frequently asked questions
What is the loft of a Wilson Staff C200 7-iron?
The Wilson Staff C200 7-iron has a loft of 32 degrees, with a 62-degree lie and a 37.5-inch steel-shaft length.
What does the C stand for in the Wilson Staff C200?
Crossover. Wilson positioned the C line between its D (distance/game-improvement) and F (feel/tour) lines, aimed at players who want distance technology in a more compact, workable head.
What is FLX Face technology on the Wilson C200?
Wilson cut material away where the face joins the body - claiming 76 percent of the face does not touch the chassis - and filled the resulting Power Holes with TE031 urethane, so more of the face flexes at impact for ball speed.
Finding a used set
The Wilson Staff C200 ran from 2016 to 2017 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- qsponge.com Wilson Staff C200 spec table (retrieved July 2026) - supplied loft, lie and length for 3-iron through GW, including the 3-iron offered right-hand only. Secondary aggregator, not a Wilson sheet.
- Golfalot 'Wilson Staff C200 Irons Review' (February 2016) - the KBS Tour 90 stock steel shaft, optional Aldila Rogue Pro graphite, the FLX Face/Power Hole construction with TE031 urethane and the 2016 release.
- Golf.com 'ClubTest 2016: Wilson Staff C200 Irons' and 2nd Swing listings corroborate the 2016 season and set composition. Wilson's own spec sheet for this generation is not retrievable, hence confidence: medium.
Last reviewed 2026-07-29. Spot an error? [email protected]