Wilson Staff FG Tour V2 Irons Specifications
Full factory loft, lie and length chart for the Wilson Staff FG Tour V2 irons, 2011–2014.
- Years produced
- 2011–2014
- Category
- Players Irons
- Construction
- forged cavity back
- Material
- forged 8620 carbon steel
- Set makeup
- 2–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Swing wt |
|---|---|---|---|---|
| 2 | 18 | 59 | 39.75 | D2 |
| 3 | 21 | 59.5 | 39.25 | D2 |
| 4 | 24 | 60 | 38.75 | D2 |
| 5 | 27 | 61 | 38.25 | D2 |
| 6 | 31 | 61.5 | 37.75 | D2 |
| 7 | 35 | 62 | 37.25 | D2 |
| 8 | 39 | 63 | 36.75 | D2 |
| 9 | 43 | 63.5 | 36.25 | D2 |
| PW | 47 | 64 | 35.75 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Wilson Staff FG Tour V2
The FG Tour V2 is the second generation of Wilson's forged players cavity back, announced with the 2012 line on 10 November 2011 and developed with Padraig Harrington, Ricky Barnes and Kevin Streelman. Forged from 8620 mild carbon steel with the mass concentrated directly behind the impact zone, it carries a thinner topline and less offset than the original FG Tour while keeping the identical traditional loft ladder — a 35-degree 7-iron and 47-degree pitching wedge. Retailers commonly list it as a 2012 model; this entry uses the announcement year per this database's convention.
Stock shafts
- KBS Tour — steel
Related models
Frequently asked questions
What is the loft of a Wilson Staff FG Tour V2 7-iron?
The Wilson Staff FG Tour V2 7-iron has a loft of 35 degrees, a lie of 62 degrees and a length of 37.25 inches.
When did the Wilson Staff FG Tour V2 irons come out?
Wilson announced them on 10 November 2011 as part of its 2012 line, with full retail availability from Spring 2012. The FG Tour V4 replaced them in 2014.
What shaft came stock in the FG Tour V2 irons?
The stock steel shaft was the KBS Tour, fitted with a Lamkin Crossline grip.
Finding a used set
The Wilson Staff FG Tour V2 ran from 2011 to 2014 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2nd Swing Golf specification table for the Wilson Staff FG Tour V2 single irons (https://www.2ndswing.com/golf-clubs/single-irons/wilson-staff-fg-tour-v2-single-iron) — supplied the 2-PW loft, lie, length and D2 swing weight data. The table prints the 8-iron loft as 36 degrees, an evident typo corrected to 39 here: the surrounding ladder runs 35-39-43 in every other FG Tour generation (original, V4) and a 36-degree 8-iron would leave a 1-degree gap to the 7-iron and a 7-degree gap to the 9-iron
- The Golf Wire 'Wilson Golf Introduces New Line Of Premium Golf Equipment For 2012', 10 November 2011 — announcement date, development with Harrington/Barnes/Streelman, thinner topline and reduced offset versus the original FG Tour, retail availability from Spring 2012 (hence the common 2012 model-year designation)
- GolfWRX and Independent Golf Reviews FG Tour V2 reviews — 8620 mild carbon steel forging with mass behind the impact zone, KBS Tour stock steel shaft with Lamkin Crossline grip
- Offset and bounce were not published in the surviving tables and are omitted; confidence is medium
Last reviewed 2026-07-29. Spot an error? [email protected]