Cleveland 588 Altitude Irons Specifications

Full factory loft, lie and length chart for the Cleveland 588 Altitude irons, 2013–2015.

Years produced
2013–2015
Category
Game Improvement Irons
Construction
full-hollow body with forged face and bendable hosel
Material
stainless steel hollow body with forged face
Set makeup
3–SW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the Cleveland 588 Altitude irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)BounceSwing wt
3196039.750.092D3
42160.7539.1250.092D3
52461.538.50.083D3
62762.2537.8750.084D3
7316337.250.086D3
83563.536.750.077D3
9396436.250.078D3
PW4464.535.750.078D3
GW4964.535.50.0711D4
SW5464.535.250.0711D4

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the Cleveland 588 Altitude

The 588 Altitude is the easiest-to-hit member of Cleveland's 2013 588 iron range, built for golfers with moderate swing speeds who struggle to flight the ball. Every head is fully hollow, placing the centre of gravity at its lowest and deepest point for maximum launch, with a forged face for ball speed and feel and a bendable hosel that allows fitting adjustments of up to 2 degrees flat or 3 upright. Lofts are traditional — 31 degrees at the 7-iron, 44 at the pitching wedge — because the design flights the ball easily without strong lofts, and the set is built light, about half an inch longer than standard with an 85-gram steel shaft. Lengths and the D3 swing weight below are the steel build; graphite builds run a quarter-inch longer at D2. The gap and sand wedge complete the set at D4.

Stock shafts

Related models

Frequently asked questions

What is the loft of a Cleveland 588 Altitude 7-iron?

The Cleveland 588 Altitude 7-iron has a loft of 31 degrees, a lie of 63 degrees and a steel-shaft length of 37.25 inches.

Are the Cleveland 588 Altitude irons adjustable?

The hosel is bendable, so a fitter can adjust lie up to 2 degrees flat or 3 degrees upright, and loft up to 2 degrees in either direction.

Who are the Cleveland 588 Altitude irons for?

They target golfers with moderate swing speeds who need help launching the ball: every head is fully hollow with a low, deep centre of gravity, and the set is built long and light with an 85-gram steel or 55-gram graphite shaft.

Finding a used set

The Cleveland 588 Altitude ran from 2013 to 2015 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • GolfClubSpec.com Cleveland 588 Altitude entry (golfclubspec.com/iron_results.php?id=259) — full loft, lie, offset and bounce table for the 3-iron through sand wedge, with steel and graphite lengths and swing weights itemised in the notes (steel D3, GW/SW D4; graphite D2, GW/SW D3) and the Actionlite 55 / Traction 85 stock shafts. Steel lengths are used in the table above.
  • Today's Golfer and Golfmagic 588 Altitude reviews — corroborate the full-hollow construction, forged face, bendable hosel (2 degrees flat to 3 upright), the 27-degree/62.25-lie 6-iron and the CG Traction 85 stock shaft
  • year_discontinued is approximate: Cleveland's 588 iron range left the line around 2015 without a direct like-for-like successor; the hollow easy-launch slot was next filled by the 2017 Launcher HB

Last reviewed 2026-07-29. Spot an error? [email protected]