Cobra Fly-Z+ Irons Specifications
Full factory loft, lie and length chart for the Cobra Fly-Z+ irons, 2015–2016.
- Years produced
- 2015–2016
- Category
- Players Irons
- Construction
- forged multi-material with tungsten heel and toe inserts
- Material
- forged 1020 carbon steel with tungsten inserts and an aluminium/TPR backplate
- Set makeup
- 3–GW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Swing wt |
|---|---|---|---|---|
| 3 | 20 | 60.5 | 39 | D3 |
| 4 | 23 | 61 | 38.5 | D3 |
| 5 | 26 | 61.5 | 38 | D3 |
| 6 | 29 | 62 | 37.5 | D3 |
| 7 | 33 | 62.5 | 37 | D3 |
| 8 | 37 | 63 | 36.5 | D3 |
| 9 | 41 | 63.5 | 36 | D3 |
| PW | 45 | 64 | 35.75 | D4 |
| GW | 50 | 64 | 35.5 | D4 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Cobra Fly-Z+
The Fly-Z+ is the forged better-player model in Cobra's 2015 Fly-Z iron family, sitting above the cast Fly-Z, Fly-Z XL and Fly-Z Pro. The 1020 carbon steel head carries tungsten inserts in the heel and toe whose position moves progressively through the set — higher-launching long irons, flatter-flighted short irons — and a lightweight aluminium backplate encased in thermoplastic rubber damps vibration together with a TPR cavity insert. Lofts are traditional for a players iron, with a 33-degree 7-iron and 45-degree pitching wedge. The stock set is eight clubs, 3-iron through pitching wedge, in steel only with the KBS Tour shaft; a 50-degree gap wedge was catalogued. Cobra did not publish offset figures for this set.
Stock shafts
- KBS Tour — steel · 115-125g · flexes: R+, S+
Related models
- Cast sibling: Cobra Fly-Z
- Predecessor: Cobra BiO Cell+
- Successor: Cobra KING Forged Tec
- Compare: Cobra Fly-Z+ vs Cobra BiO Cell+
- Compare: Cobra Fly-Z+ vs Cobra KING Forged Tec
- Compare: Cobra Fly-Z+ vs Cobra Fly-Z
Frequently asked questions
What is the loft of a Cobra Fly-Z+ 7-iron?
The Cobra Fly-Z+ 7-iron has a loft of 33 degrees, a lie of 62.5 degrees and a length of 37 inches.
What clubs come in a stock Cobra Fly-Z+ set?
The stock set is eight clubs, 3-iron through pitching wedge, in steel with the KBS Tour shaft in R+ or S+ flex. A 50-degree gap wedge was also catalogued.
Is the Cobra Fly-Z+ forged or cast?
It is forged from 1020 carbon steel, with tungsten heel and toe inserts and an aluminium backplate encased in thermoplastic rubber. The other Fly-Z models are cast.
Finding a used set
The Cobra Fly-Z+ ran from 2015 to 2016 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Cobra Golf official Fly-Z+ Forged Irons product page (cobragolf.com/fly-z-plus-forged-irons), archived 2015-03-06 via web.archive.org — retrieved directly; supplies the full Specifications table (loft, length, lie, steel swing weight, stock flex, 3-iron through GW), the 'STOCK SET COMPOSITION - 8 Clubs, Steel (Stiff+, Reg+): 3-PW' block, the tungsten-insert and aluminium/TPR damping descriptions and the KBS Tour R+/S+ shaft table. No offset column is published for this model.
- GolfWRX 'Cobra Fly Z, Fly Z+ and Fly Z Pro Irons' launch coverage — identifies the head as five-times-forged 1020 carbon steel and places the Fly-Z+ as the forged better-player model of the 2015 family
Last reviewed 2026-07-29. Spot an error? [email protected]