Maltby TS-2 Irons Specifications
Full factory loft, lie and length chart for the Maltby TS-2 irons, 2018–2024.
- Years produced
- 2018–2024
- Category
- Players Distance Irons
- Construction
- three-piece billet forged hollow body, polymer filled, tungsten toe weight
- Material
- forged 1025C carbon steel body and 2 mm face, internal tungsten weight
- Set makeup
- 4–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 4 | 21 | 61 | 38.5 | 0.14 | 3 |
| 5 | 24 | 61.5 | 38 | 0.135 | 3 |
| 6 | 27 | 62 | 37.5 | 0.13 | 3 |
| 7 | 30 | 62.5 | 37 | 0.125 | 4 |
| 8 | 34 | 63 | 36.5 | 0.12 | 4 |
| 9 | 39 | 63.5 | 36 | 0.11 | 4 |
| PW | 44 | 64 | 35.5 | 0.1 | 5 |
| GW | 49 | 64 | 35.5 | 0.1 | 5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Maltby TS-2
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Maltby TS-2
The TS-2 opened Maltby's Tour Series in 2018 as the distance half of the pair the compact TS-1 completed a few months later. It is a three-piece, true billet-forged hollow iron — a 2 mm 1025C carbon steel face and 1025C body with an internal tungsten weight positioned low and toward the toe, precision-welded and, from the 4-iron through 9-iron, injection-filled with dense polymer behind the whole face to boost deflection and feel. Lofts run a degree to a degree and a half stronger than the TS-1 (30-degree 7-iron, 44-degree pitching wedge) with more offset and a larger blade, which is what pushes it into the players-distance class; on Maltby's own MPF forgiveness scale it rates 727 at the 6-iron, in the Super Game Improvement band. The 4-GW chart comes in satin polished chrome, right hand only, on a universal hosel accepting .370 parallel or .355 taper shafts. The GolfWorks sells it as bare heads or built-to-order custom sets, so the lengths below are the company's published standard men's steel assembly lengths. Still in the line as of 2026.
Related models
Frequently asked questions
What is the loft of a Maltby TS-2 7-iron?
The Maltby TS-2 7-iron has a loft of 30 degrees and a lie of 62.5 degrees, with 0.125 inches of offset and a 37-inch length on The GolfWorks' standard steel build.
What is the difference between the Maltby TS-1 and TS-2?
Both are billet-forged hollow designs with tungsten toe weighting, but the TS-2 is the distance head: lofts one to two degrees stronger (30 against 32 at the 7-iron), more offset (0.140 against 0.120 inches at the long end) and a larger profile, while the TS-1 keeps the more compact players shape.
Is the Maltby TS-2 forgiving?
By Maltby's own measurement, yes — it rates 727 MPF at the 6-iron, inside the Super Game Improvement band, despite looking like a players iron.
Is the Maltby TS-2 still available?
Yes. As of 2026 The GolfWorks still sells TS-2 heads and custom builds, more than seven years after its 2018 introduction.
Finding a used set
The Maltby TS-2 ran from 2018 to 2024 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- The GolfWorks official Maltby TS-2 Forged Iron Heads page (golfworks.com/maltby-ts-2-forged-iron-heads/p/ma0294/) and its factory specification chart — 4-GW lofts 21/24/27/30/34/39/44/49, lies 61-64, offsets 0.140 to 0.100 inches, bounces 3-5 degrees, head weights 245-290 g, satin polished chrome, 1025C carbon steel, universal hosel and MPF 701+ badge, plus the construction copy: hollow three-piece design, 2 mm forged face, internal tungsten toe weight, and polymer fill behind the face in the 4-iron through 9-iron.
- The GolfWorks Head MPF Ratings chart (golfworks.com/content/PDFs/Head_MPFs/MPFRatingsChart.pdf, updated July 2026) — 'MALTBY TS2 #6 2018, MPF 727', which fixes year_introduced 2018, a year before the TS1's 2019 listing.
- Fit2YouGolf 'Maltby TS-1 and TS-2 Forged Irons', 19 January 2019, and the GolfWRX club-techs thread on the TS-2 heads from 2018 — independent coverage of the launch window and the enhanced-playability, enhanced-distance brief.
- Lengths are from The GolfWorks' published Standard Lengths chart (golfworks.com/images/art/StdLengths.pdf, men's steel: 38.5-inch 4-iron through 35.5-inch PW and GW) because Maltby heads are sold component-style and built to order; playing lengths vary per build, hence confidence medium.
- Status check, 29 September 2026: year_discontinued is 2024. No successor. The product page was live on 22 April 2024 and absent from GolfWorks' head listing by 19 June 2024 (golfworks.com, archived 2024).
Last updated 29 September 2026. Spot an error? info@loftchart.com