PXG 0311 P GEN7 Irons Specifications
Full factory loft, lie and length chart for the PXG 0311 P GEN7 irons, 2024–2026.
- Years produced
- 2024–2026
- Category
- Players Distance Irons
- Construction
- forged hollow body with a welded face
- Material
- forged 8620 carbon steel body with an ultra-thin HT1770 maraging steel face and a 20 g internal tungsten toe weight
- Set makeup
- 4–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 4 | 20.5 | 61 | 38.875 | 0.22 |
| 5 | 23 | 61.5 | 38.25 | 0.19 |
| 6 | 26 | 62 | 37.625 | 0.16 |
| 7 | 30 | 62.5 | 37 | 0.13 |
| 8 | 34 | 63 | 36.5 | 0.1 |
| 9 | 39 | 63.5 | 36 | 0.075 |
| PW | 44 | 64 | 35.75 | 0.05 |
| GW | 49 | 64 | 35.5 | 0.04 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the PXG 0311 P GEN7
GEN7 replaced the XCOR2 core with QuantumCOR and thinned the maraging face to 0.050 inches, a claimed 15 per cent reduction, with a 20-gram internal tungsten toe weight pulling the centre of gravity back to the middle of the face. The loft, lie, length and offset chart is unchanged from the GEN5 and GEN6 P heads — PXG has run the same P numbers for three generations. PXG stamps the two scoring clubs W and G; they are listed here as PW and GW.
Stock shafts
- Mitsubishi MMT 70 — graphite
- True Temper Dynamic Gold Mid 115 — steel
- Project X LZ — steel
Related models
Frequently asked questions
What is the loft of a PXG 0311 P GEN7 7-iron?
The PXG 0311 P GEN7 7-iron has a loft of 30 degrees, a lie of 62.5 degrees and a length of 37.0 inches.
When were the PXG 0311 GEN7 irons released?
PXG released GEN7 on 7 August 2024, alongside the Black Ops irons. The GEN8 range replaced it in January 2026.
What changed between the PXG GEN6 and GEN7 irons?
The core material — QuantumCOR replaced XCOR2 — the face was thinned to 0.050 inches, and a 20-gram internal tungsten toe weight was added. The loft, lie, length and offset chart did not change.
Finding a used set
The PXG 0311 P GEN7 ran from 2024 to 2026 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2nd Swing Golf specification table for the PXG 0311 P GEN7 iron set (https://www.2ndswing.com/golf-clubs/iron-sets/pxg-0311-p-gen7-iron-set) — supplied loft, lie, length and offset for the 4-iron through gap wedge. The table labels the offset column in millimetres, but the values are the same inch figures PXG publishes for the GEN6 P, so they are recorded here as inches.
- PXG's own 0311 P GEN6 spec page (https://pxg.com.au/pages/pxg-0311-p-gen6-iron-specs) — identical chart, which is how the GEN7 figures were cross-checked.
- pxg.com 'PXG Releases GEN7 Irons and Black Ops Irons' and todays-golfer.com's GEN7 launch piece — 7 August 2024 release, QuantumCOR, 0.050-inch maraging face, 20 g internal tungsten toe weight.
- Note: bounce is omitted because the source table did not carry a bounce column. year_discontinued is the GEN8 range (https://www.pxg.com/products/gen8-irons), which ships P, XP and T heads and was announced on 15 January 2026.
Last reviewed 2026-07-28. Spot an error? [email protected]