TaylorMade 320 Irons Specifications
Full factory loft, lie and length chart for the TaylorMade 320 irons, 2001–2003.
- Years produced
- 2001–2003
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 2–LW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 2 | 18 | 59 | 39.5 | 0.209 |
| 3 | 20 | 59 | 39 | 0.209 |
| 4 | 23 | 60 | 38.5 | 0.189 |
| 5 | 27 | 61 | 38 | 0.169 |
| 6 | 31 | 61.5 | 37.5 | 0.15 |
| 7 | 35 | 62 | 37 | 0.134 |
| 8 | 39 | 62.5 | 36.5 | 0.118 |
| 9 | 43 | 63 | 36 | 0.102 |
| PW | 47 | 63.5 | 35.5 | 0.087 |
| AW | 51 | 64 | 35.5 | 0.079 |
| SW | 55 | 64 | 35.25 | 0.02 |
| LW | 60 | 64 | 35 | 0 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade 320
The 320 was the mid-size member of TaylorMade's 300 series, sold alongside the compact 300 Forged and the oversize 360 so that golfers could pick a head size rather than a different technology. The cast stainless cavityback carries moderate offset and a progressive centre of gravity through the set, with a 35-degree 7-iron and 47-degree pitching wedge. The stock set ran 3-PW with a 2-iron and four wedges through AW, SW and LW available. Lengths below are the published graphite-shaft build; steel shafts played 0.25 inches shorter except in the wedges, which were the same length in both.
Stock shafts
- Royal Precision Rifle Flighted Constant Weight — steel
- TaylorMade Lite Constant Weight — graphite
Related models
- Compact forged sibling in the 300 series: TaylorMade 300 Forged
- Oversize sibling in the 300 series: TaylorMade 360
- Successor game-improvement family: TaylorMade rac OS
- Predecessor distance iron: TaylorMade SuperSteel
- Compare: TaylorMade 320 vs TaylorMade SuperSteel
- Compare: TaylorMade 320 vs TaylorMade rac OS
- Compare: TaylorMade 320 vs TaylorMade 300 Forged
- Compare: TaylorMade 320 vs TaylorMade 360
- Compare: TaylorMade 320 vs TaylorMade Firesole
Frequently asked questions
What is the loft of a TaylorMade 320 7-iron?
The TaylorMade 320 7-iron has a loft of 35 degrees, with a 62-degree lie and a 37-inch graphite-shaft length (36.75 inches in steel).
What is the difference between the TaylorMade 300, 320 and 360 irons?
All three launched together in 2001 as the 300 series. The 300 Forged is the compact players head, the 320 is the mid-size cast cavityback, and the 360 is the largest, most offset game-improvement head.
What shafts did the TaylorMade 320 come with?
The stock steel shaft was the Royal Precision Rifle Flighted Constant Weight, with TaylorMade's Lite Constant Weight graphite as the stock graphite option.
Finding a used set
The TaylorMade 320 ran from 2001 to 2003 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- equip2golf.com Taylor Made 320 specifications page (full 2-LW loft/lie/length/offset table, year 2001; lengths noted as graphite with steel 0.25 inch shorter except PW/AW/SW/LW; Rifle Flighted Constant Weight steel and Taylor Made Lite Constant Weight graphite stock shafts, Cross-Line grip, right- and left-handed)
- Offsets converted from the millimetre values published by equip2golf (5.3 mm 2-iron to 0.0 mm LW)
- TaylorMade's official Irons Legacy timeline (taylormadegolf.com/ironslegacy.html) groups the 300 Series (three head sizes, progressive CG, impact pad) with the 300 Forged and 360; the repo's 300 Forged file and equip2golf both date the range to 2001
Last reviewed 2026-07-29. Spot an error? [email protected]