TaylorMade 360 Irons Specifications
Full factory loft, lie and length chart for the TaylorMade 360 irons, 2001–2003.
- Years produced
- 2001–2003
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 2–LW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 2 | 18 | 59 | 39.5 | 0.295 |
| 3 | 20 | 60 | 39 | 0.276 |
| 4 | 23 | 61 | 38.5 | 0.256 |
| 5 | 26 | 61.5 | 38 | 0.236 |
| 6 | 30 | 62 | 37.5 | 0.217 |
| 7 | 34 | 62.5 | 37 | 0.189 |
| 8 | 38 | 63 | 36.5 | 0.161 |
| 9 | 42 | 63.5 | 36 | 0.138 |
| PW | 46 | 64 | 35.5 | 0.114 |
| AW | 51 | 64 | 35.5 | 0.079 |
| SW | 55 | 64 | 35.25 | 0.02 |
| LW | 60 | 64 | 35 | 0 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade 360
The 360 was the oversize game-improvement member of TaylorMade's 300 series, the largest of the three head sizes offered alongside the 300 Forged and 320. It carries the most offset in the range - 7.5 millimetres in the 2-iron - with lofts about a degree stronger than the 320 through the middle of the set, a 34-degree 7-iron and a 46-degree pitching wedge. The stock set ran 3-PW with a 2-iron and AW, SW and LW available. Lengths below are the published graphite-shaft build; steel shafts played 0.25 inches shorter except in the wedges, which were the same length in both.
Stock shafts
- Royal Precision Rifle Flighted Constant Weight — steel
- TaylorMade Lite Constant Weight — graphite
Related models
- Compact forged sibling in the 300 series: TaylorMade 300 Forged
- Mid-size sibling in the 300 series: TaylorMade 320
- Successor oversize game-improvement iron: TaylorMade rac OS
- Compare: TaylorMade 360 vs TaylorMade 320
- Compare: TaylorMade 360 vs TaylorMade SuperSteel
- Compare: TaylorMade 360 vs TaylorMade rac OS
- Compare: TaylorMade 360 vs TaylorMade 300 Forged
Frequently asked questions
What is the loft of a TaylorMade 360 7-iron?
The TaylorMade 360 7-iron has a loft of 34 degrees, with a 62.5-degree lie and a 37-inch graphite-shaft length (36.75 inches in steel).
Is the TaylorMade 360 a forgiving iron?
Yes. It was the largest and most offset head in the 2001 300 series, aimed at golfers who wanted maximum forgiveness; the 320 offered a mid-size head and the 300 Forged a compact players head.
What wedges were available for the TaylorMade 360?
Beyond the 46-degree pitching wedge, TaylorMade offered a 51-degree attack wedge, a 55-degree sand wedge and a 60-degree lob wedge in the same head style.
Finding a used set
The TaylorMade 360 ran from 2001 to 2003 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- equip2golf.com Taylor Made 360 specifications page (full 2-LW loft/lie/length/offset table, year 2001; lengths noted as graphite with steel 0.25 inch shorter except PW/AW/SW/LW; Rifle Flighted Constant Weight steel and Taylor Made Lite Constant Weight graphite stock shafts, Cross-Line grip, right- and left-handed)
- Offsets converted from the millimetre values published by equip2golf (7.5 mm 2-iron to 0.0 mm LW)
- Year note: equip2golf files the 360 under 2001 with the rest of the 300 series; some retailer listings use 2002, which is the marketing model year rather than the introduction year
Last reviewed 2026-07-29. Spot an error? [email protected]